Detection and Isolation of Campylobacter spp. from Raw Meat.

This article presents a rapid yet robust protocol for isolating Campylobacter spp. from raw meats, specifically focusing on Campylobacter jejuni and Campylobacter coli. The protocol builds upon established methods, ensuring compatibility with the prevailing techniques employed by regulatory bodies such as the Food and Drug Administration (FDA) and the U.S. Department of Agriculture (USDA) in the USA, as well as the International Organization for Standardization (ISO) in Europe. Central to this protocol is collecting a rinsate, which is concentrated and resuspended in Bolton Broth media containing horse blood. This medium has been proven to facilitate the recovery of stressed Campylobacter cells and reduce the required enrichment duration by 50%. The enriched samples are then transferred onto nitrocellulose membranes on brucella plates. To improve the sensitivity and specificity of the method, 0.45 µm and 0.65 µm pore-size filter membranes were evaluated. Data revealed a 29-fold increase in cell recovery with the 0.65 µm pore-size filter compared to the 0.45 µm pore-size without impacting specificity. The highly motile characteristics of Campylobacter allow cells to actively move through the membrane filters towards the agar medium, which enables effective isolation of pure Campylobacter colonies. The protocol incorporates multiplex quantitative real-time polymerase chain reaction (mqPCR) assay to identify the isolates at the species level. This molecular technique offers a reliable and efficient means of species identification. Investigations conducted over the past twelve years involving retail meats have demonstrated the ability of this method to enhance recovery of Campylobacter from naturally contaminated meat samples compared to current reference methods. Furthermore, this protocol boasts reduced preparation and processing time. As a result, it presents a promising alternative for the efficient recovery of Campylobacter from meat. Moreover, this procedure can be seamlessly integrated with DNA-based methods, facilitating rapid screening of positive samples alongside comprehensive whole-genome sequencing analysis.

Use of a commercial tissue dissociation system to detect Salmonella-contaminated poultry products.

Successful detection of bacterial pathogens in food can be challenging due to the physical and compositional complexity of the matrix. Different mechanical/physical and chemical methods have been developed to separate microorganisms from food matrices to facilitate detection. The present study benchmarked a commercial tissue digestion system that applies both chemical and physical methods to separate microorganisms from tissues against stomaching, a standard process currently utilized by commercial and regulatory food safety laboratories. The impacts of the treatments on the physical properties of the food matrix were characterized along with the compatibility of the methods with downstream microbiological and molecular detection assays. The results indicate the tissue digestion system can significantly reduce the average particle size of the chicken sample relative to processing via a stomacher (P < 0.001) without adversely affecting either real-time PCR (qPCR) or plate counting assays, which are typically used to detect Salmonella. Furthermore, inoculated chicken treated with the GentleMACS resulted in a significant increase (P < 0.003) in the qPCR's detection capabilities relative to stomached controls. Cohen kappa (κ) coefficient and McNemar's test indicate the plating assays and PCR results agree with measurements obtained via the 3 M Molecular Detection System as defined in the MLG standard (κ > 0.62; P > 0.08). Collectively, the results demonstrate that the technique enables detection of pathogens in meat at lower levels of contamination using current industry standard technologies.

Endodontic Radiopacifying Application of Barium Titanate Prepared through a Combination of Mechanical Milling and Heat Treatment.

Mineral trioxide aggregates (MTA) are commonly used as endodontic filling materials but suffer from a long setting time and tooth discoloration. In the present study, the feasibility of using barium titanate (BTO) for discoloration and a calcium chloride (CaCl2) solution to shorten the setting time was investigated. BTO powder was prepared using high-energy ball milling for 3 h, followed by sintering at 700-1300 °C for 2 h. X-ray diffraction was used to examine the crystallinity and crystalline size of the as-milled and heat-treated powders. MTA-like cements were then prepared using 20-40 wt.% BTO as a radiopacifier and solidified using a 0-30% CaCl2 solution. The corresponding radiopacity, diametral tensile strength (DTS), initial and final setting times, and discoloration performance were examined. The experimental results showed that for the BTO powder prepared using a combination of mechanical milling and heat treatment, the crystallinity and crystalline size increased with the increasing sintering temperature. The BTO sintered at 1300 °C (i.e., BTO-13) exhibited the best radiopacity and DTS. The MTA-like cement supplemented with 30% BTO-13 and solidified with a 10% CaCl2 solution exhibited a radiopacity of 3.68 ± 0.24 mmAl and a DTS of 2.54 ± 0.28 MPa, respectively. In the accelerated discoloration examination using UV irradiation, the color difference was less than 1.6 and significantly lower than the clinically perceptible level (3.7). This novel MTA exhibiting a superior color stability, shortened setting time, and excellent biocompatibility has potential for use in endodontic applications.

Complete closed genome sequences of three multidrug-resistant uropathogenic Escherichia coli.

Infection by antibiotic-resistant extraintestinal pathogenic Escherichia coli may result in treatment failure and thus pose a serious public health threat. Here we report the complete closed genome sequence of three multidrug-resistant (MDR) human uropathogenic E. coli isolates using long-read sequencing technology and de novo assembly.

Missing Piece in Colloidal Stability─Morphological Factor of Hydrophobic Nanoparticles.

Hydrophobic nanoparticles (NPs) in water were considered unstable because they lack the repulsive electrostatic interaction and steric effect to prevent aggregation. In this study, porous hydrophobic NPs of two star-shaped giant molecules, POSS-(R)8, were found to be stable in water and able to retain their kinetic stability in a wide range of temperatures, pH values, and ionic strengths. Unlike the solid hydrophobic NPs that aggregate even with the negative zeta potential (ζ) induced by surface-structured hydrogen-bonded (SHB) water, the porous morphology of POSS-(R)8 NPs reduces the entropically driven hydrophobic effect to prevent aggregation. With the porous morphology, the hydrophobic NPs are stable without the hydrophilic or charged surface functional groups and demonstrate good encapsulation capability. The morphological factor of colloids is thus one of the missing pieces in the theory of colloidal stability that extends our understanding of colloidal science.

Complete Genome Sequences of a Stress-Resistant Outbreak-Associated Shiga Toxin-Producing Escherichia coli O157:H7 Strain and a Variant with Enhanced Congo Red-Binding Capability.

The genome sequences of Escherichia coli O157:H7 strain 380-94, which was isolated from a 1994 dry-cured salami outbreak, and a stronger Congo red-binding variant, RV06, were determined using long-read sequencing technology and de novo assembly. Both strains possessed one chromosome and one plasmid. Strain RV06 possessed a 4,769-bp deletion in the rcs region.

Discoloration Improvement by Mechanically-Milled Binary Oxides as Radiopacifier for Mineral Trioxide Aggregates.

Mineral trioxide aggregates (MTA) have been widely used in endodontic treatments, but after some time, patients suffer tooth discoloration due to the use of bismuth oxide (Bi2O3) as a radiopacifier. Replacement of Bi2O3 with high energy ball-milled single (zirconia ZrO2; hafnia, HfO2; or tantalum pentoxide, Ta2O5) or binary oxide powder was attempted, and corresponding discoloration improvement was investigated in the present study. Bi2O3-free MTA is expected to exhibit superior discoloration. The radiopacity, diametral tensile strength, and discoloration of MTA-like cements prepared from the as-milled powder were investigated. Experimental results showed that MTA-like cements prepared using Ta2O5 exhibited a slightly higher radiopacity than that of HfO2 but had a much higher radiopacity than ZrO2. Milling treatment (30 min to 3 h) did not affect the radiopacities significantly. These MTA-like cements exhibited superior color stability (all measured ΔE00 < 1.0) without any perceptible differences after UV irradiation. MTA-like cements prepared using ZrO2 exhibited the best color stability but the lowest radiopacity, which can be improved by introducing binary oxide. Among the investigated samples, MTA-like cement using (ZrO2)50(Ta2O5)50 exhibited excellent color stability and the best overall performance with a radiopacity of 3.25 mmAl and a diametral tensile strength of 4.39 MPa.

Sequence analysis and plasmid mobilization of a 6.6-kb kanamycin resistance plasmid, pSNC3-Kan, from a Salmonella enterica serotype Newport isolate.

Research on the transfer of antibiotic resistance plasmids has been mainly focused on the large multi-drug resistance conjugative plasmids, while the transmission of small mobilizable plasmids remains under-investigated. A series of diverse ColE-like kanamycin resistance plasmids ("KanR plasmids") from Salmonella enterica were characterized previously. In this study, the 6.6-kb pSNC3-Kan from a Salmonella enterica serotype Newport isolate was investigated. It possessed highly conserved RNA I/II and Tn602 (IS903-aph-IS903) regions to two other KanR plasmids pSe-Kan and pSBardo-Kan, but carried a mobC-mobA/BD operon. The mobilization proteins encoded by the mob operon of pSNC3-Kan showed high sequence identity (~95%) to those of an E. coli plasmid pEC34B, except that MobE was not present; and were much less conserved to those of another KanR plasmid pSN11/00Kan (43% - 86% identity). Four structurally different KanR plasmids were investigated for their ability to be mobilized by the conjugal transfer (tra) genes from F and IncP plasmids. Transfer genes derived from IncP plasmids can efficiently mobilize KanR plasmids possessing the mob operons (mobC-mobA/BD), such as pSNC3-Kan and pSN11/00Kan, in bi-parental mating experiments. On the other hand, F tra genes were able to mobilize pU302S, pSNC3-Kan and pSe-Kan, but not pSN11/00Kan. A plasmid-borne mob operon was not required for mobilization of the oriT(F)-bearing pSe-Kan by the F tra genes. This study underscores the complexity of plasmid interaction and the importance of how small mobilizable plasmids may contribute to the spread of antibiotic resistance genes.

Effect of Tantalum Pentoxide Addition on the Radiopacity Performance of Bi2O3/Ta2O5 Composite Powders Prepared by Mechanical Milling.

Among the various phases of bismuth oxide, the high temperature metastable face-centered cubic δ phase attracts great attention due to its unique properties. It can be used as an ionic conductor or an endodontic radiopacifying material. However, no reports concerning tantalum and bismuth binary oxide prepared by high energy ball milling and serving as a dental radiopacifier can be found. In the present study, Ta2O5-added Bi2O3 composite powders were mechanically milled to investigate the formation of these metastable phases. The as-milled powders were examined by X-ray diffraction and scanning electron microscopy to reveal the structural evolution. The as-milled composite powders then served as the radiopacifier within mineral trioxide aggregates (i.e., MTA). Radiopacity performance, diametral tensile strength, setting times, and biocompatibility of MTA-like cements solidified by deionized water, saline, or 10% calcium chloride solution were investigated. The experimental results showed that subsequent formation of high temperature metastable ß-Bi7.8Ta0.2O12.2, δ-Bi2O3, and δ-Bi3TaO7 phases can be observed after mechanical milling of (Bi2O3)95(Ta2O5)5 or (Bi2O3)80(Ta2O5)20 powder mixtures. Compared to its pristine Bi2O3 counterpart with a radiopacity of 4.42 mmAl, long setting times (60 and 120 min for initial and final setting times) and 84% MG-63 cell viability, MTA-like cement prepared from (Bi2O3)95(Ta2O5)5 powder exhibited superior performance with a radiopacity of 5.92 mmAl (the highest in the present work), accelerated setting times (the initial and final setting time can be shortened to 25 and 40 min, respectively), and biocompatibility (94% cell viability).

Genomic Comparison of Conjugative Plasmids from Salmonella enterica and Escherichia coli Encoding Beta-Lactamases and Capable of Mobilizing Kanamycin Resistance Col-like Plasmids.

Salmonella enterica and Escherichia coli are important human pathogens that frequently contain plasmids, both large and small, carrying antibiotic resistance genes. Large conjugative plasmids are known to mobilize small Col plasmids, but less is known about the specificity of mobilization. In the current study, six S. enterica and four E. coli strains containing large plasmids were tested for their ability to mobilize three different kanamycin resistance Col plasmids (KanR plasmids). Large conjugative plasmids from five isolates, four S. enterica and one E. coli, were able to mobilize KanR plasmids of various types. Plasmids capable of mobilizing the KanR plasmids were either IncI1 or IncX, while IncI1 and IncX plasmids with no evidence of conjugation had disrupted transfer regions. Conjugative plasmids of similar types mobilized similar KanR plasmids, but not all conjugative plasmid types were capable of mobilizing all of the KanR plasmids. These data describe some of the complexities and specificities of individual small plasmid mobilization.

Water-Induced Self-Assembly of Amphiphilic Discotic Molecules for Adaptive Artificial Water Channels.

Inspired by the induced-fit mechanism in nature, we developed the process of water-induced self-assembly (WISA) to make water an active substrate that regulates the self-assembly and function of amphiphilic discotic molecules (ADMs). The ADM is an isotropic liquid that self-assembles only when in contact with water. Characterization results indicate that water fits into the hydrophilic core of the ADMs and induces the formation of a hexagonal columnar phase (Colh), where each column contains a hydrated artificial water channel (AWC). The hydrated AWCs are adaptive rather than static; the dynamic incorporation/removal of water results in the reversible assembly/disassembly of the adaptive AWCs (aAWCs). Furthermore, its dynamic characteristics can enable water to act as an orientation-directional guest molecule that controls the growth direction of the aAWCs. Well-aligned aAWC arrays that showed the ability of water transport were obtained via a "directional WISA" method. In WISA, water thus governs the supramolecular chemistry and function of synthetic molecules as it does with natural materials. By making water an active component in adaptive chemistry and enabling host molecules to dynamically interact with water, this adaptive aquatic material may motivate the development of synthetic molecules further toward biomaterials.

Mesoporous Properties of Bioactive Glass Synthesized by Spray Pyrolysis with Various Polyethylene Glycol and Acid Additions.

Mesoporous bioactive glass (MBG) has a high specific surface area, promoting the reaction area, thereby improving the bioactivity; thus, MBG is currently gaining popularity in the biomaterial field. Spray pyrolysis (SP) is a one-pot process that has the advantages of shorter process time and better particle bioactivity, therefore, MBG was prepared by SP process with various polyethylene glycol (PEG, molecular weight ranged from 2000-12,000) and acid (HCl and CH3COOH) additions. In vitro bioactivity and mesoporous properties of the so-obtained MBG were investigated. The experimental results showed that all the MBG exhibited amorphous and mesoporous structure. Increasing the molecular weight of PEG can improve the mesoporous structure and bioactivity of MBG. Whereas optimized MBG was prepared with suitable concentration of PEG and CH3COOH. In the present work, MBG synthesized via spray pyrolysis by adding 5 g of PEG with a molecular weight of 12,000 and 50 mL of CH3COOH exhibited the best in vitro bioactivity and mesoporous structure.

Impact of Zr-Doped Bi2O3 Radiopacifier by Spray Pyrolysis on Mineral Trioxide Aggregate.

Mineral trioxide aggregates (MTA) have been developed as a dental root repair material for a range of endodontics procedures. They contain a small amount of bismuth oxide (Bi2O3) as a radiopacifier to differentiate adjacent bone tissue on radiographs for endodontic surgery. However, the addition of Bi2O3 to MTA will increase porosity and lead to the deterioration of MTA's mechanical properties. Besides, Bi2O3 can also increase the setting time of MTA. To improve upon the undesirable effects caused by Bi2O3 additives, we used zirconium ions (Zr) to substitute the bismuth ions (Bi) in the Bi2O3 compound. Here we demonstrate a new composition of Zr-doped Bi2O3 using spray pyrolysis, a technique for producing fine solid particles. The results showed that Zr ions were doped into the Bi2O3 compound, resulting in the phase of Bi7.38Zr0.62O12.31. The results of materials analysis showed Bi2O3 with 15 mol % of Zr doping increased its radiopacity (5.16 ± 0.2 mm Al) and mechanical strength, compared to Bi2O3 and other ratios of Zr-doped Bi2O3. To our knowledge, this is the first study of fabrication and analysis of Zr-doped Bi2O3 radiopacifiers through the spray pyrolysis procedure. The study reveals that spray pyrolysis can be a new technique for preparing Zr-doped Bi2O3 radiopacifiers for future dental applications.

Vesicular Membrane with Structured Interstitial Water.

Self-assembled vesicles with structured (tetrahedral order with strong hydrogen bonds) interstitial water are reported. The vesicles, known as MCsome, are assembled from metal carbonyl compounds, FpR (Fp = (Cp)Fe(PPh3)(CO)(CO-), Cp = cyclopentadiene, R = C3Bithiophene, C6Pyrene or C6) with the Fp heads exposed to water. The R groups are surrounded by the interstitial water with the hydrogen bonding strength variable depending on the hydrophobicity of R groups. The structure of the interstitial water is responsible for the integrity of the membrane and swelling behavior of the vesicles. This constructional role of water opens new concepts for the creation of aqueous assemblies with water-mediated functions.

Factors Affecting Treatment with Life-Saving Interventions, Computed Tomography Scans and Specialist Consultations.

Background: Emergency treatments determined by emergency physicians may affect mortality and patient satisfaction. This paper attempts to examine the impact of patient characteristics, health status, the accredited level of hospitals, and triaged levels on the following emergency treatments: immediate life-saving interventions (LSIs), computed tomography (CT) scans, and specialist consultations (SCs). Methods: A multivariate logistic regression model was employed to analyze the impact of patient characteristics, including sex, age, income and the urbanization degree of the patient's residence; patient health status, including records of hospitalization and the number of instances of ambulatory care in the previous year; the Charlson Comorbidity Index (CCI) score; the accredited level of hospitals; and the triaged level of emergency treatments. Results: All the patient characteristics were found to impact receiving LSI, CT and SC, except for income. Furthermore, a better health status was associated with a decreased probability of receiving LSI, CT and SC, but the number of instances of ambulatory care was not found to have a significant impact on receiving CT or SC. This study also found no evidence to support impact of CCI on SC. Hospitals with higher accredited levels were associated with a greater chance of patients receiving emergency treatments of LSI, CT and SC. A higher assigned severity (lower triaged level) led to an increased probability of receiving CT and SC. In terms of LSI, patients assigned to level 4 were found to have a lower chance of treatment than those assigned to level 5. Conclusions: This study found that several patient characteristics, patient health status, the accredited level of medical institutions and the triaged level, were associated with a higher likelihood of receiving emergency treatments. This study suggests that the inequality of medical resources among medical institutions with different accredited levels may yield a crowding-out effect.

The complex multicellular morphology of the food spoilage bacteria Brochothrix thermosphacta strains isolated from ground chicken.

Herein we describe a highly structured, filamentous growth phenotype displayed by an isolate of the food spoilage microorganism Brochothrix thermosphacta. The growth morphology of this B. thermosphacta strain (strain BII) was dependent on environmental factors such as the growth media, incubation temperatures, and the inoculum concentration. Inoculation of cultures in highly dilute suspensions resulted in the formation of isolated, tight aggregates resembling fungal growth in liquid media. This same strain also formed stable, mesh-like structures in 6-well tissue culture plates under specific growth conditions. The complex growth phenotype does not appear to be unique to strain BII but was common among B. thermosphacta strains isolated from chicken. Light and electron micrographs showed that the filaments of multiple BII cells can organize into complex, tertiary structures resembling multistranded cables. Time-lapse microscopy was employed to monitor the development of such aggregates over 18 h and revealed growth originating from short filaments into compact ball-like clusters that appeared fuzzy due to protruding filaments or cables. This report is the first to document this complex filamentous growth phenotype in a wild-type bacterial isolate of B. thermosphacta.

The Design of ZnO Nanorod Arrays Coated with MnOx for High Electrochemical Stability of a Pseudocapacitor Electrode.

Tremendous efforts have been made on the development of unique electrochemical capacitors or pseudocapacitors due to the overgrowing electrical energy demand. Here, the authors report a new and simple strategy for fabricating hybrid MnOx-coated ZnO nanorod arrays. First, the vertically aligned ZnO nanorods were prepared by chemical bath deposition (CBD) as a template providing a large surface area for active material deposition. The manganese oxide was subsequently coated onto the surface of the ZnO nanorods to form a hybrid MnOx-coated ZnO nanostructure by anodic deposition in a manganese acetate (MnA)-containing aqueous solution. The hybrid structure of MnOx-coated ZnO nanorod arrays exhibits a large surface area and high conductivity, essential for enhancing the faradaic processes across the interface and improving redox reactions at active MnOx sites. A certain concentration of the deposition solution was selected for the MnOx coating, which was studied as a function of deposition time. Cyclic voltammetry (CV) curves showed that the specific capacitance (SC) of the MnOx-coated ZnO nanostructure was 222 F/g for the deposition times at 10 s when the concentration of MnA solution was 0.25 M. The unique hybrid nanostructures also exhibit excellent cycling stability with >97.5% capacitance retention after 1200 CV cycles. The proposed simple and cost-effective method of fabricating hybrid nanostructures may pave the way for mass production of future intelligent and efficient electrochemical energy storage devices.

Effects of Milling Time, Zirconia Addition, and Storage Environment on the Radiopacity Performance of Mechanically Milled Bi2O3/ZrO2 Composite Powders.

Mineral trioxide aggregate (MTA) typically consists of Portland cement (75 wt.%), bismuth oxide (20 wt.%), and gypsum (5 wt.%) and is commonly used as endodontic cement. Bismuth oxide serving as the radiopacifying material reveals the canal filling effect after clinical treatment. In the present study, bismuth/zirconium oxide composite powder was prepared by high energy ball milling of (Bi2O3)100-x (ZrO2)x (x = 5, 10, 15, and 20 wt.%) powder mixture and used as the radiopacifiers within MTA. The crystalline phases of the as-milled powders were examined by the X-ray diffraction technique. The radiopacities of MTA-like cements prepared by using as-milled composite powders (at various milling stages or different amount of zirconia addition) were examined. In addition, the stability of the as-milled powders stored in an ambient environment, an electronic dry box, or a glove box was investigated. The experimental results show that the as-milled powder exhibited the starting powder phases of Bi2O3 and ZrO2 and the newly formed δ-Bi7.38Zr0.62O2.31 phase. The longer the milling time or the larger the amount of the zirconia addition, the higher the percentage of the δ-Bi7.38Zr0.62O2.31 phase in the composite powder. All the MTA-like cements prepared by the as-milled powder exhibited a radiopacity higher than 4 mmAl that is better than the 3 mmAl ISO standard requirement. The 30 min as-milled (Bi2O3)95(ZrO2)5 composite powder exhibited a radiopacity of 5.82 ± 0.33 mmAl and degraded significantly in the ambient environment. However, storing under an oxygen- and humidity-controlled glove box can prolong a high radiopacity performance. The radiopacity was 5.76 ± 0.08 mmAl after 28 days in a glove box that was statistically the same as the original composite powder.

Aurora B functions at the apical surface after specialized cytokinesis during morphogenesis in C. elegans.

Although cytokinesis has been intensely studied, the way it is executed during development is not well understood, despite a long-standing appreciation that various aspects of cytokinesis vary across cell and tissue types. To address this, we investigated cytokinesis during the invariant Caenorhabditis elegans embryonic divisions and found several parameters that are altered at different stages in a reproducible manner. During early divisions, furrow ingression asymmetry and midbody inheritance is consistent, suggesting specific regulation of these events. During morphogenesis, we found several unexpected alterations to cytokinesis, including apical midbody migration in polarizing epithelial cells of the gut, pharynx and sensory neurons. Aurora B kinase, which is essential for several aspects of cytokinesis, remains apically localized in each of these tissues after internalization of midbody ring components. Aurora B inactivation disrupts cytokinesis and causes defects in apical structures, even if inactivated post-mitotically. Therefore, we demonstrate that cytokinesis is implemented in a specialized way during epithelial polarization and that Aurora B has a role in the formation of the apical surface.